Air Shower Specification
- Home
- Air Shower Specification
Our Products Categories
Products Details
An air shower is a self-contained chamber installed at cleanroom entrances to reduce contaminants, using high-velocity air jets to remove particles from personnel or items before entry.
| Supply Filter :- Imported Minipleat HEPA Filter with hot melt technology, which conforms to EU-14 grade at supply position with an Efficiency rating better than 99.999% for 0.3 micron (Make :- Acme Air Filter) |
| Pre filter :- Pre- filter are made from Non-Woven Synthetic with HDPE mesh ; conforms to EU-06 grade , with an Efficiency rating better than 95% down to 5 micron (Make :- Acme Air Filter) |
| Motor Blower assembly :- Motor blower designed of statically” and dynamically balanced for supply of sufficient capacity and static pressure to take care of air low requirement for entire life of HEPA. (Make :- National Product) |
| Pressure Gauge: – Magnehelic Gauge (0-25MM:1 Nos. ) to monitor pressure drop across HEPA (Make:- Nextech) |
| Lighting :- Fluorescent light (250 Lux)at work surface (Make:- Philips) |
| ON/OFF Switches :- Key Pad ON/OFF Switches for motor & lights (Make:-Instec India) |
| Switch socket :- 6/15 Amp single- phase switch socket use for external equipment (Make:- Anchker) |
| Control System: – Interlocking system to ensure that both the doors cannot open at the same time & to ensure that both the doors stay locked during the time of air low. |
| Time setting for Air shower :- Time setting for air shower operation time (settable for 30 seconds to 5 minutes) |
| Emergency Operation :- Emergency stop will be provided |
| Door Opening :- Straight entry straight exit and 90 degree door opening |
| Operation Mode :- Automatic As well as manual mode |
| DOP Port: – DOP test port at upstream of HEPA filter integrity test .(with PAO Solution ) |
| Door: – SS 304 doors with double flush glass view panels and door closer. |
| Electric Supply :- 230V AC1- Ø 50 HZ/ 415V AC 3-Ø 50 HZ |
| Noise Level :- Less than 67 DB on scale ‘A’ when ambient is not greater than 55 DB on Scale ‘A’ |
| Vibration Level :- Minimum |
