Stand Mounted Laminar Air Flow

Products Details

A Stand Mounted Laminar Air Flow unit provides a controlled, particle-free environment by directing HEPA-filtered air vertically or horizontally over work surfaces. Ideal for laboratory and cleanroom applications, this freestanding unit offers flexible placement and efficient protection for sensitive processes and materials.
Moc main Body SS 304 1mm  Thickness (Make :- Jindal Stainless Limited)
Exhaust Hepa Filter Hepa filter are made from water resistant, fire retardant, imported micro fine glass fibre media; conforming to EU – 14 Grade with efficiency rating 99.999% for 0.3 u. (Make :- Acme Air Filter)
 Pre Filter pre filter Are Made From Non – Woven Synthetic With  HOPE mesh ; Conforms to EU 4 Grade, With an Efficiency Rating better than 90% down to 10 micron. (Make :- Acme Air Filter)
Intermediate Filter Intermediate Filter are made from Non – Woven Synthetic With HOPE mesh; Conforms To EU -7 Grade with an efficiency rating better than 95% for 3 micron. (Make :- Acme Air Filter)
Motor blower Motor blower designed of statically and dynamically balanced for supply of sufficient capacity and static pressure to take care of air flow requirement for entire life of HEPA. (Make :- National Products)
Different pressure Gauge Diff pressure Gauge: (0-25mm: 2 Nos.) to monitor pressure drop across HEPA & Intermediate filter and (0-10mm 1 Nos.) across pre-filter. (Make:- Nextech)
Lighting Fluorescent Light (250 Lux) at work surface. (Make:- phillips)
Switch Socket 6/15 Amp Single- Phase switch Socket use for external equipment.
Supply Filter Imported Minipleat HEPA filter with hpt melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% for 0.3 micron. (Make :- Acme Air Filter)
Control Panel  Electrical control panel mounted on the side panel of the unit.
DOP Port DOP Test port.
Electrical Supply 230V AC1- Ø 50 HZ/ 41 5V AC 3-Ø 50 HZ
Noise Level Less than 67 Db On Scale ‘A’ When Ambient is not greater than 55 Db On Scale ‘A’.
Vibration Level  Minimum